1. Advantages
1: Standardization of geometric dimensions for portal steel pipe scaffolding.
2: Reasonable structure, good load-bearing performance, fully utilizing the strength of steel, and high load-bearing capacity.
3: Easy to assemble and disassemble during construction, high efficiency in installation, time-saving, safe and reliable, and economically applicable.
2. Disadvantages
1: There is no flexibility in the size of the framework, and any changes in the size of the framework require the use of a different model of gantry and its accessories
2: Cross supports are prone to breaking at the middle hinge point;
3: The fixed scaffold board is relatively heavy,
4: The price is relatively expensive
3. Adaptability
1: Construct standardized scaffolding
2: Support frame for beam and slab structures (bearing vertical loads);
3: Construct an activity workbench;
4. Installation requirements
1. The foundation of the gantry scaffold must be compacted and a drainage slope should be made to prevent water accumulation
2. The sequence of erecting a gantry scaffold is as follows: foundation preparation → placement of cushion plates → placement of bases → vertical two single piece gantry frames → installation of cross bars → installation of scaffold boards → based on this, repeat the installation process of gantry frames, cross bars, and scaffold boards.
3. The gantry steel pipe scaffold should be erected from one end to the other. The previous scaffold should be erected before the next scaffold is erected. The direction of installation is opposite to the next step.
4. For the installation of each scaffold step, two gantry frames should be inserted into the base of the endpoint first, and then cross bars should be installed for fixation, locking plates should be locked. Then, the subsequent gantry frames should be erected. For each scaffold, cross bars and locking plates should be installed immediately.
5. Scaffolding must be securely connected to the building.
6. The outer side of the door buckle type steel pipe scaffold should be equipped with diagonal braces, which should be continuously set vertically and longitudinally.
Nov 14, 2023
Jäta sõnum
Paari
48 mm leheklamberKüsi pakkumist





